|
Manufacturing
Capabilities |
Standard |
Non-standard/Special |
|
MAX. BOARD SIZE
MULTILAYER |
510 x 260 mm |
510 x 380 mm |
|
MAX. BOARD SIZE
SINGLE
AND DOUBLE
SIDED |
510 x 380 mm |
|
|
ROUTING
TOLERANCE |
0.2 mm ( 8 mil
) |
|
|
MAX. NUMBER OF
LAYERS |
18 |
18+ |
|
MAX. THICKNESS |
3.2 mm |
4.0 mm |
|
MIN. THICKNESS
SS AND DS BOARDS |
0.2 mm |
|
|
MIN. THICKNESS
4 LAYERS |
0.6 mm |
0.4 mm |
|
MIN. THICKNESS
6 LAYERS |
0.8 mm |
0.6 mm |
|
MIN. THICKNESS
8 LAYERS |
1.2 mm |
1.0 mm |
|
MIN. THICKNESS
10 LAYERS |
1.6 mm |
1.2 mm |
|
BOARD THICKNESS
TOLERANCE |
± 0.15 mm (6
mil ) |
± 0.10 mm (4
mil ) |
|
BOARD FLATNESS |
200: 1 |
|
|
STANDARD BASE
COPPER CLAD THICKNESS |
18, 35, 70 and
105 μm |
140
μm |
|
STANDARD PCB
THICKNESS |
0.2, 0.5, 0.8,
1.0, 1.2,1.6,
2.4, 3.2 |
|
|
CU PLATING
THICKNESS |
25
μm MIN. |
|
|
MAX. ASPECT
RATIO |
5 : 1 ( Board
Thickness/
Hole Diameter ) |
6 : 1 ( Board
Thickness/
Hole Diameter ) |
|
SMALLEST
DRILLED COMP HOLE |
0.5 mm ( 20 mil
) |
|
|
SMALLEST
DRILLED VIA HOLE |
0.3 mm ( 12 mil
) |
0.25 mm ( 10
mil ) |
|
FINISHED HOLE
SIZE TOLERANCE |
± 0.1 mm ( 4
mil ) |
|
|
MIN. ANNULAR
RING INT. VIA PADS |
7 mil |
5 mil |
|
MIN. ANNULAR
RING EXT. VIA PADS |
6 mil |
5 mil |
|
MIN. INNERLAYER
HOLE CLEARANCE |
16 mil
|
|
|
MIN. TRACK
WIDTH |
6 mil ( see
Note 1 ) |
5 mil |
|
MIN . GAP WIDTH |
6 mil ( see
Note 1 ) |
5 mil |
|
SOLDER MASK &
COMP. REF. |
Screen printed
( 8 mil) |
|
|
SOLDER MASK
TYPE |
Photo imageable |
|
|
SOLDER MASK
OPTIONS |
Green standard;
black, red and blue available |
|
|
COMPONENT
REFERENCE OPTIONS |
UV curable
white standard; yellow available |
|
|
STANDARD
PROFILE FINISH |
CNC rout ± 0.2
mm |
|
|
STANDARD
SURFACE FINISH |
HASL |
|
|
HOT AIR
LEVELING |
10
μm |
|
|
FLASH NICKEL
GOLD |
Available |
|
|
IMMERSION TIN |
Available |
|
|
GOLD PLATING ON
EDGE CONNECTORS |
5
μm |
|
|
NETLIST TESTING |
Standard |
|
|
MICRO
SECTIONING |
Available |
|
|
STANDARD
DELIVERY TIME |
1-10 days
(see Note 2) |
10 – 15 days |
|
PREFERRED CAD
INPUT FORMAT |
Imbedded Gerber
(Gerber RS274X) Mechanical drawing |
|
|
DRILL & ROUT
FILE FORMAT |
Excellon format |
|
|
OTHER CAD
FORMAT |
Tango PCB files |
|
|
PCB DESIGN AND
ROUTING |
Available (
see Note 3 ) |
|
|
Note 1: Track sizes and clearances quoted are general
design rules over the entire board on all layers. Track and
clearances down to 4 thou and clearances down to 6 thou can be
accommodated on smaller areas of the board. Please, contact
Engineering department.
Note 2: Our sales staff can advise you on specific
turnaround times with your specific order in mind.
Note 3: Only where a CAD system capable of exporting a
Spectra design file is used.
|
